SNMP Managed Media Converters

 

Our Managed Media Converters are designed to convert Fast Ethernet. With intelligent software support and a long list of supported applications and features, our managed media converters are perfect for network management and high bandwidth applications. Supporting Multimode and Singlemode, these come with a variety of options to custom fit your application.

OVERVIEW

The FT-M1100 is designed to make conversion between 10/100Base-TX to 100Base-FX Fast Ethernet. With SNMP agent, web-based management and Telnet text-based menu driven management, the network administrator can logon the converter to monitor, configure and control the activity of each port. It support LFP (Link Fault Pass-through) function, The Link Pass Through function is a combination of two mechanisms: Link Loss Carry Forward (LLCF) and Link Loss Return (LLR). In addition, the converter implements bandwidth rating management capability via intelligent software. The overall network management is enhanced, and the network efficiency is also improved to accommodate and deliver high bandwidth applications.

 

FEATURES

Supports each converter module media configured and monitored ability:
Optional: LFP(LLCF and LLR) function
Supports port state enabled/disabled
Supports auto-negotiation/forced mode
Supports port speed and duplex mode
Supports wire speed packet forwarding ability as below:
10Base-T : 14880 pps
100Base-TX: 148800 pps
Supports module per port basic counters for traffic raw data monitor of fiber and TP port as below:
RX Packet Counter
RX Byte Counter
TX Packet Counter
TX Byte Counter
Error Counter
Collision Counter
TX Speed (bps)
RX Speed (bps)
RMON counters for port traffic quality monitoring function
Max packet length: 1916 bytes

Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports
Supports comprehensive types of fiber with different distances and connections, including SC/ST/Bidi/LC
Ports: one 10/100Base-T Fast Ethernet UTP port and one 100Base-FX Fast Ethernet Fiber port
Supports Q-in-Q double tagged frame transparent
Supports firmware upgrade by TFTP
Hot-swap and auto reload configuration ability
Supports IEEE 802.1p Priority
Supports IEEE 802.1q Tag VLAN
QoS Classification based on TOS
Supports intelligent diagnostic for self detection
External loop back capability
Supports web-based and text-based management user interface
Supports DHCP
Supports SMTP
Supports E-mail client (SMTP RFC 821) and Mobile Phone short message (SMS)
Supports Dying Gasp function
RoHS Compliant
 
Technical Specification

■Standards Compliance
IEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX specification
IEEE 802.3x full-duplex flow control specification
100Base-FX Fast Ethernet Fiber specification
 
■Network Interface
10 /100Base-TX:
- Connectors: RJ-45
- Auto-Negotiation
- Auto-MDIX
- Transmission: Full/Half-Duplex
- Max. Cable Length: up to 100m

100Base-FX (Multi mode):
- Connectors: SC / ST / LC
- Transmission: Full/Half-Duplex
- Max. Cable Length: 2Km for 62.5/125mm
- Wavelength: 1310nm

100Base-FX (Single mode):
- Connectors: SC / Bidi-SC / Bidi-SFF
- Transmission: Full/Half-Duplex
- Max. Cable Length: 100Km for 9/125μm
- Wavelength: 1310nm or 1550nm

Complies with FCC Part 15 Class A & CE Mark Approval
 
■Power Requirement :  0.8A @+5VDC
■Power Consumption:  4W
■Ambient Temperature:  0° to 50°C
■Humidity :  5% to 90%
■Dimensions :  140.7(L) X 90(W) X 30.6(H) mm

Power Source: Built-in power supply: AC220V; DC-48V
Size: Inner-mounted: 156mm × 128.2mm × 32mm
Environment: Operating temperature: 0°C to 50°C
           Storage temperature: -40°C to 70°C
           Humidity: 5% ~ 90% non-condensing
Weight: 1kg (including power supply)

Toll Free (877)-320-3143

Call  (321)-473-8933

Sales@fibertronics.com

Reliable, Consistent, Quality

Reliable, Consistent, Quality